Maintaining your boat trailer: 9 Tips and Tricks
Transporting your precious RIB boat requires a trailer in perfect condition! That's why today Orca Retail offers you 8 tips to ensure the longevity of your trailer, from checking the brakes to maintaining the galvanized parts. These practical tips will help you get the most out of your outings in complete safety!
Tip 1: Check your car's brakes
Before hitting the road, test your brakes at 10-15 km/h to make sure the wheels lock simultaneously, the trailer stays in line, and braking is smooth. In the event of problems, consult a professional for optimum adjustment.
Tip 2: Check the electrical part
Before every trip, check that your trailer's rear lights are working properly. Opt for sealed beacons to facilitate maintenance and reduce vibrations during transport.
Tip 3: Grease the necessary parts
Elements such as the ball joint, screws, bearings and rollers should be regularly cleaned and greased. This protects against corrosion, especially before wintering.
Tip 4: Check your tires and wheels
Perfectly inflated tires contribute to safer driving and even wear. Regularly check the pressure of the trailer tires.
Also, make sure the jockey wheel is working properly by rotating it fully. Regular greasing is essential to ensure its proper functioning.
Tip 5: Balance loads
Always observe the recommended weight limitations for your trailer. Make sure the load is evenly distributed on the trailer to avoid any imbalance during transport, which could affect handling.
Tip 6: Inspect straps and fasteners
Before each trip, check the condition of tie-down straps and restraints. Worn or damaged straps can compromise transport safety.
Tip 7: Flush the trailer
After each use, rinse the trailer thoroughly to remove all traces of salt, preventing corrosion. Then roll for a few minutes to drain off any residual water.
Tip 8: Clean galvanized parts
Clean galvanized parts after each use to prevent corrosion. Salt water can cause rust, requiring careful cleaning. Apply anti-corrosion products on exposed metal parts to protect the trailer against rust.
When launching, be sure to immersed wheels only up to the crown of the tire to avoid oxidation.
Tip 9: Prepare for winterizing
When winterizing, elevate the wheels with a jackto prevent tire deformation. Use stanchions for stable support. Finally, protect electrical parts from potential damage.
Conclusion
Follow these practical tips to ensure the longevity of your boat trailer. With regular maintenance, you can sail safely and enjoy your passion to the full.
Discover our products!
Read more about the world of RIBs: